 |
Cooking
Equipment
|
|
About
us
| Contact
Us |Product
Specifications |Home
|
|
66, Okhla Industrial Estate, New Delhi-110020
INDIA Phone : (++91 11) 2684-7280, 2682-0723 Fax :
2464-2716, 2684-7280 Email Sales |
|
Specialty
Items
Receiving and Handling
Refrigeration and Storage
Preparation
Cooking
Service and
Merchandising
Ware washing & Dishwashing
Beverage &
Desert Service
Bakery
and Confectionary
Bar Service
Ice
Cube & water conditioning
Ventilation
and Exhaust Hoods
Rodent & Pest Control
Waste
& Garbage Management
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
 |
|
|
|
|
Rotary Toaster
|
|
|
|
| Go
Top |
|
Stock Pot Stove
Features:These
sturdy cooking ranges are very useful for cooking in large pots which are
difficult to lift high and stir contents.
Specifications:16G Stainless steel Top, Cast Iron square pot support, 20G S.S. side ,
rear and front panels, SS
sliding drip tray with built in handle, Torch type HP burner
70,000.00 btu/hr. Inlet LPG
gas pressure 5psi.M.S. Angle frame, 6" high S.S. pipe legs
with S.S. bullet feet.
Model
GSPS-1-600
600mmx600mmx450mm high- 1 Burner
Model GSPS-2-1200 1200mmx600mmx450mm high- 2 Burners
Model GSPS-3-1800 1800mmx600mmx450mm high- 3 Burners
Model GSPS-1-675
675mmx675mmx450mm high- 1
Burner
Model GSPS-2-1350 1350mmx675mmx450mm high- 2 Burners
Model
GSPS-3-2025 2025mmx675mmx450mm high- 3 Burners
|
| Go
Top |
|
Gas Cooking Range
Features:These sturdy normal height cooking ranges are very useful for cooking in
pots /frying pans and saute pans etc. Specifications:16G
Stainless steel Top, Cast Iron square pot support, 20G S.S. side , rear
and front panels, SS sliding
drip tray with built in handle, A selection of gas burners for varying
heat requirements from 22,000 btu/hr to 70,000btu /hr. in torch type flame
or side flame configuration.Each burner has an individual pilot flame and
needle gas control valve.Inlet LPG gas
pressure 1/2 psi for low pressure application and 5 psi for high pressure
application.M.S. Angle frame, Stainless steel pipe or sheet undershelf as
required.6" high S.S. pipe legs with S.S. bullet feet.Burner
configuaration may also be in line or front and back as desired and
convenient.
In line Burners Models
Model
GCR-1-600S
600mmx600mmx850mm high-
1 Burner
Model GCR-2-1200S 1200mmx600mmx850mm high- 2 Burners
Model
GCR-3-1800S 1800mmx600mmx850mm
high- 3 Burners
Model GCR-4-2400S 2400mmx600mmx850mm high- 4 Burners
Model GCR-1-675S
675mmx675mmx850mm high- 1 Burner
Model GCR-2-1350S 1350mmx675mmx850mm high- 2 Burners
Model GCR-3-2025S 2025mmx675mmx850mm high- 3 Burners
Model GCR-4-2700S 2700mmx675mmx850mm high- 4 Burners
Front and Back burners Models(Operations from front only)
Model GCR-4-900 FB
900mmx900mmx850mm high- 4 Burners
Model GCR-4-1350FB 1350mmx900mmx850mm high- 6 Burners
|
| Go
Top |
|
Gas Cooking Range with oven.
Features:These sturdy normal height cooking ranges are very useful for cooking in
pots /frying pans and saute pans etc and baking and roasting food.
Specifications:16G Stainless steel Top, Cast Iron square pot support, 20G
S.S. side , rear and front panels, SS sliding drip tray with built in handle, A selection of gas
burners for varying heat requirements from 22,000 btu/hr to 70,000btu /hr.
in torch type flame or side flame configuration.Each burner has an
individual pilot flame and needle gas control valve.Inlet LPG gas pressure 1/2 psi for low pressure application and 5 psi
for high pressure application.M.S. Angle frame, Stainless steel pipe or
sheet undershelf as required.6" high S.S. pipe legs with S.S. bullet
feet.Burner configuaration front and back A gas fired Mild steel interior
oven approximately 525mmx670mmx325mm high, insulated and with drop down
stainless steel door, thermostatically controlled is provided.The oven has
one wre shelf and one drip tray.Arrangement is made for escape of flue
gases at the rear.
Model GCR-4-900 FB/Oven 900mmx900mmx850mm high- 4 Top Burners+ Oven
Burner
|
| Go
Top |
|
Gas Griddle Plate/ Dosa
Plate/Hot Plate.
Features:These sturdy normal height plate type ranges are very useful for shallow
frying items like Dosa, Cutlets, Hamburger patties and slow cooking
in pots Specifications:16G
Stainless steel Top, 12 mm thick mild steel reinforced plate with side
anti splash edges and front oil drain facility, 20G S.S. side , rear and
front panels, SS oil drip
tray with built in handle.V flame gas burners for varying heat
requirements Each burner has an individual pilot flame and needle gas
control valve.Inlet LPG gas
pressure 5 psi for high pressure. M.S. Angle frame, Stainless steel pipe
or sheet undershelf as required.6" high S.S. pipe legs with S.S.
bullet feet. Optional arrangements of Open Flame burners and hot plates
are available on request.
600mm wide series
Model GGP-1-900A 900mmx600mmx850mm high- 2
Burners
Model GGP-2-1200A 1200mmx600mmx850mm high-
3 Burners
Model GGP-3-1500A 1500mmx600mmx850mm high-
3 Burners
675mm wide series
Model GGP-1-900B 900mmx675mmx850mm high- 2
Burners
Model GGP-2-1200B 1200mmx675mmx850mm high-
3 Burners
Model GGP-3-1500B 1500mmx675mmx850mm high- 3
Burners
750mm wide series
Model GGP-1-900C 900mmx750mmx850mm high- 2
Burners
Model GGP-2-1200C 1200mmx7505mmx850mm high- 3 Burners
Model GGP-3-1500C 1500mmx750mmx850mm high-
3 Burners
900 mm wide series
Model GGP-1-900D 900mmx900mmx850mm high- 2 Burners
|
| Go
Top |
|
GAS Heated Deep
fat Fryer
Features:These sturdy normal height deep fryers
are very useful for deep frying items like Samosa, meats,
cutlets,french fries, chicken, fish etc.Special cool zone construction
reduces fat carbonisation for improved taste and economical use of
expensive cooking oil.Wire mesh frying baskets drain the oil back into the
frying pot reducing consumption of oil.
Specifications:16G Stainless steel Top and frying tank,20G
S.S. side , rear and front panels, SS
oil pan with built in handle.V flame gas burners for varying heat
requirements Each burner has an individual pilot flame and needle gas
control valve.Inlet LPG gas
pressure 5 psi for high pressure. M.S. Angle frame, Stainless steel sheet
undershelf as required.6" high S.S. pipe legs with S.S. bullet feet.A
Stainless Steel wire frying basket is provided with each tank of the
fryer. The gas consumption is approximately 2kg/hour per tank. Optional
front enclosure door in stainless steel at extra cost.
Features:These sturdy normal height deep fryers
are very useful for deep frying items like Samosa, meats,
cutlets,french fries, chicken, fish etc.Special cool zone construction
reduces fat carbonisation for improved taste and economical use of
expensive cooking oil.Wire mesh frying baskets drain the oil back into the
frying pot reducing consumption of oil.
Specifications:16G Stainless steel Top and frying
tank,20G S.S. side , rear and front panels, SS
oil pan with built in handle.V flame gas burners for varying heat
requirements Each burner has an individual pilot flame and needle gas
control valve.Inlet LPG gas
pressure 5 psi for high pressure. M.S. Angle frame, Stainless steel sheet
undershelf as required.6" high S.S. pipe legs with S.S. bullet feet.A
Stainless Steel wire frying basket is provided with each tank of the
fryer. The gas consumption is approximately 2kg/hour per tank. Optional
front enclosure door in stainless steel at extra cost.
750mm deep series
Model
GDF-1-450C
450mmx750mmx850mm
high- 1 tank-12 -15 litres oil
Model GDF-2-700C
700mmx750mmx850mm high-
2 tank-12 -15 litres oil each tank
900mm deep series
Model GDF-1-450D
450mmx900mmx850mm high- 1 tank-18 -20litres oil
Model GDF-2-700D
700mmx900mmx850mm high-
2 tank-18-20 litres oil each tank
|
| |
|
Electrically Heated Deep
fat Fryer
Features:These sturdy normal height deep fryers
are very useful for deep frying items like Samosa, meats,
cutlets,french fries, chicken, fish etc.Special "cool zone"
construction reduces fat carbonisation for improved taste and economical
use of expensive cooking oil.Wire mesh frying baskets drain the oil back
into the frying pot reducing consumption of oil.
Specifications:16G Stainless steel Top and frying tank,20G
S.S. side , rear and front panels, SS
oil pan with built in handle.Swing up type electrical heating
elements for varying heat
requirements. Each tank has an individual thermostaic control Stainless
steel sheet undershelf as required.6" high S.S. pipe legs with S.S.
bullet feet.A Stainless Steel wire frying basket is provided with each
tank of the fryer.
Optional front enclosure door in stainless steel
at extra cost.
750mm deep series
Model EDF-1-450C 450mmx750mmx850mm high- 1
tank-12 -15 litres oil, 220v/1ph/3kw
Model EDF-2-700C 700mmx750mmx850mm high-
2 tank-12 -15 litres oil each tank 2x220v/1ph/3kw(6KW)
900mm deep series
Model
EDF-1-450D
450mmx900mmx850mm
high- 1 tank-18 -20 litres oil ,440v/3ph/6kw
Model
EDF-2-700D
700mmx900mmx850mm high-
2 tank-18-20 litres oil each tank, 2 x 440v/3ph/6kw (12kw)
|
| Go
Top |
|
Gas Salamander
Features: These heavy duty top heating units are ideal for grilling meats, fish,
browning top of baked vegetables etc.These can be mounted above a griddle
plate or a spreader table and save on work space. Specifications:18G
Stainless steel double cased insulated body,20G S.S. drip tray,S.S. rod
grill which slides in three positions in channels. The salamander has two
infra red gas burners mounted on the top.Each burner has an individual
pilot flame and needle gas control valve.Inlet LPG
gas pressure 1/2 psi for low pressure.
Model GS-1 Size: 750x450x450
|
| Go
Top |
|
Electric Salamander
Features: These heavy duty top heating units are ideal for grilling meats, fish,
browning top of baked vegetables etc.These can be mounted above a griddle
plate or a spreader table and save on work space. Specifications:18G
Stainless steel double cased insulated body,20G S.S. drip tray,S.S. rod
grill which slides in three positions in channels. The salamander has air
heating elements mounted on the top.The elements are thermostatically
controlled
Model ES-1 Size: 600x300 x300;
220v/1ph/3kw
Model ES-2 Size: 750x450x450 ;
440v/3ph/3kw
|
| Go
Top |
|
Charcoal Tandoor
Features:The traditional Indian
Clay tandoor is encased in stainless steel to aesthetically match the rest
of the kitchen cooking battery and greater hygiene. Specifications:. Boxed
welded angle framework and
reinforced on all side and at bottom. 25mm tightly packed glass wool on
all four sides and on the lid.Top with 50mm thick
commercial grade tandoor clay slab insulated at bottom
Exterior on all four sides and top lid of 18GA.S.S. Mild steel Ring
lid bolted/ removable,to replace damaged tandoor when needed.On the front
cutout positioned suitably for ash removal. Frame accommodates heavy duty
char coal heated commercial clay tanoor of nominal size 32"
body X outer 30" height X 14" dia mouth opening at top.
Insulation includes broken stones, aluminium foil wrapped glass wool,
sand between exterior of tandoor &inside of boxed body to
ecsure that heat does not get trasferred to top lid
or exterior cladding stand;Front panel of tandoor body to be
removable for sliding out damaged clay Tandoor for replacement easily.
Size: 1000mm
wide x1000mm deep x 900mm high overall to S.S. top
Optionally a set of castors can
be provided for moving the tandoor to outdoor locations from a storage
area.
|
| Go
Top |
|
CHINESE COOKING RANGE
Top shall be 12mm M.S. plate with Stainless Steel integral water
channel and 21" high back splash at rear. S.S. spreader in front.
Sides and back in 20 gauge stainless steel, front 18 gauge stainless steel
as 14" M.S. angle box frame. S.S. pipe legs with bullet feet and S.S.
pipe cross bracing. The unit shall have heavy M.S. Drums and Chinese pan
support. Burners and pilots shall have individual control valves.
(A)
SIZE: 72"X36"X34" (THREE BURNER)
(B)
SIZE: 84"X36"X34" (FOUR BURNER
|
| Go
Top |
|
|
| Go
Top |
|
|
|
Go Top
|
